Change from DHCP to Static IP

[Enquiries]

I have the TVX-h874 for my work from home (personal and business setup) and in my initial setup I think I selected DHCP, but since I don't plan on having it connected to the internet I'd like to switch to Static IP. I can't seem to find where in the qnap setttings or qfinder how I set the Qnap's IP to static now that it is configured. In your video: https://www.youtube.com/watch?v=PvBwE2B13eg
at around 12:00 minutes, you mention this can be changed later. Any advice? Thank you for all the info you provide via youtube. As a very novice user for my home setup, your info has been extremely useful.

[ed]

To change the IP address of your QNAP NAS from DHCP to a static IP address, you can follow these steps:

Open QTS and log in to your QNAP NAS as an administrator.
Click "Control Panel" > "Network & File Services" > "Network" > "TCP/IP".
Click the drop-down menu next to "IP Configuration" and select "Static IP".
Enter the desired static IP address, subnet mask, and default gateway.
Click "Apply" to save the changes.
Note that after changing the IP address, you may need to restart your QNAP NAS and any devices connected to it for the changes to take effect.