12-06-2022, 04:51 PM
(This post was last modified: 12-06-2022, 04:53 PM by AmproMedia.
Edit Reason: Corrected spelling
)
Hi all,
Hope you are all well. :-)
I've got a Synology 1821+ NAS and I fitted the Synology 10 Gbe card to it a while back. I then fitted an Asus XG-C100C 10G network adapter to my PC to set up 10 Gbe networking with my NAS. I have got the network up and running and it's plenty fast enough to edit live in daVinci Resolve Studio, so I'm fairly happy with the whole thing.
BUT,
I could have sworn when I first set it up, it was running at 10 Gbe and now it appears to only run at 5 Gbe. I have tried switching various settings within Win10-64 for the network card but I can't seem to make the NAS or my PC report it as a 10 Gbe connection.
Does anyone know a trick to get this card set up and running at full speed? I am still running the mainboard onboard 1 Gbe network connection to my 1 Gbe switch, but my Asus 10 Gbe card is connected directly to my Synology card. The Synology DSM software reports the speed as 5000 Mbps, Full Duplex, MTU 9000. The only reference to jumbo frames in the Asus driver I can find allows me to set it to MTU 9014 bytes.
Any help or suggestions, much appreciated.
Kind regards, A.
Hope you are all well. :-)
I've got a Synology 1821+ NAS and I fitted the Synology 10 Gbe card to it a while back. I then fitted an Asus XG-C100C 10G network adapter to my PC to set up 10 Gbe networking with my NAS. I have got the network up and running and it's plenty fast enough to edit live in daVinci Resolve Studio, so I'm fairly happy with the whole thing.
BUT,
I could have sworn when I first set it up, it was running at 10 Gbe and now it appears to only run at 5 Gbe. I have tried switching various settings within Win10-64 for the network card but I can't seem to make the NAS or my PC report it as a 10 Gbe connection.
Does anyone know a trick to get this card set up and running at full speed? I am still running the mainboard onboard 1 Gbe network connection to my 1 Gbe switch, but my Asus 10 Gbe card is connected directly to my Synology card. The Synology DSM software reports the speed as 5000 Mbps, Full Duplex, MTU 9000. The only reference to jumbo frames in the Asus driver I can find allows me to set it to MTU 9014 bytes.
Any help or suggestions, much appreciated.
Kind regards, A.