Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

QDA-U2MP as RAID 10 in a TS-h973AX faster than RAID 1?

#1
I've just purchased a TS-h973AX.
Now want to populate the 2x U.2 drive bays and decided to get 2x QDA-U2MP and install 4x WD RED NVMe SSDs in a RAID 10 configuration for redundancy with best performance.
On a second thought I'm unsure, whether the RAID 10 configuration will give me any advantages in speed vs. a RAID 1 with 2 of the cheaper QDA-UMP adapters. If the ASMEDIA chip in the QDA-U2MP cuts the bandwidth in halve for each SSD this would be the bottleneck of the setup and the speed would be about the same as with the RAID 1 configuration.

Has anyone made tests whether there is a difference in performance between a RAID 10 with QDA-U2MP adapters and a RAID 1 with QDA-UMP especially in a TS-h973AX?

Thanks
Reply


Messages In This Thread
QDA-U2MP as RAID 10 in a TS-h973AX faster than RAID 1? - by Pete248 - 09-18-2022, 01:26 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)