10-18-2024, 03:29 PM
(10-03-2024, 05:13 PM)biebel38 Wrote: Hello,
Some time ago I received the CWWK Q670 Motherboard, the version that has a 2 SFF-8643 onboard ports instead of the 8-sata ports. I originally ordered that one, but they decided to send me this version instead as the 8-sata port version wasn't available anymore. I decided to give this one a try, so I've been experimenting with it to see what would be a good layout for a combination of HDD and NVME disks.
According to the attached picture, from their product page, it should be possible to change the onboard SFF-8643 PCIe connector from 4 PCI3.0 x 1 signals to 1 PCI3.0 x 4 signal via the BIOS, but so far I haven't figured it out which setting(s) this would be. I checked everything that made sense, but no luck so far. The BIOS version is the one that came with the board, I couldn't find a more recent version on their support page. There's one for the Q670 8-sata version, but attempting to use that one results in the error "The host CPU does not have write access to the target flash area.", which probably indicates it's not a suitable BIOS version.
I've tried to contact CWWK support for 2 weeks now, with no reply yet. Any ideas would be very welcome.
B.
Hi,
I got the same board just today I found on their website the BIOS:
Unfortunately link not allowed
This looks like a recent update. I checked on the nascompare site the following article: CWWK Q670 Gen 5 NAS 8-Bay Board Review
That is not exactly the same board but I believe the BIOS is the same:
Unfortunately link not allowed
NAScompares not yet reviwed this board - Unfortunately link not allowed - what we got hopefully they will do sometime as this is looks way better than the other Q670 board.
Hope this helps. Itrying to configure my in the meantime, I have the links for the BIOS and the article but not allowed to upload to a reply.