Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Qnap TS-464eU-8G - WD Red SN700 NVMe & 32GB RAM

#1
Hello Robbie and Eddie!

Just purchased Qnap TS-464eU-8G for my rack cabinet as a replacement to TS-673 (I am aware of the noise generated) and future possibility to migrate to ZFS.
I have two questions and would appreciate your support. 

I am hesitating to buy 2 x WD Red SN700 NVMe 500 or 1000 capacity due lack of the information if I can configure them as QTS drive in Raid 1.
I read somewhere that there is no advantage of QTS being installed on NVMe as the system is spread across all drives. 
Is that really the case for QTS (and in future for ZFS), hence using both NVMe as cache would be better option?
From the old system I have 4 x HDD Red (SMR unfortunately) that I will configure in Raid 10 to reduce a risk of drive failure if I would have them in Raid 5 configuration and during potential rebuilding of the raid matrix.

Second question I have regarding 2 x 16GB DDR4, to be more specific the Crucial ‎CT16G4SFRA32A.
Many sources reports that the onboard intel can support more than 16GB of RAM and up to 64 in total.
Have you heard or know if that is the case and before I make my mind to buy the extra memory?


I would highly appreciate your reply.
Andy
Reply


Messages In This Thread
Qnap TS-464eU-8G - WD Red SN700 NVMe & 32GB RAM - by Dysl3cic - 10-11-2024, 02:27 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)