Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Small 8-Bay NAS with ECC and Transcoding

#3
Based on your requirements, here are detailed recommendations for your NAS build:

Motherboard and CPU Recommendations
SuperMicro X11SSH-TF or X11SSH-CTF:

CPU: Intel Xeon E3-1230 v6. This CPU supports ECC memory and has a low power consumption while being capable of 4K transcoding.
SuperMicro X11SPM-TF or X11SPM-TPF:

CPU: Intel Xeon Silver 4110. Although this is more expensive, it provides higher performance for 4K transcoding and more advanced features.
Case and Cooling
U-NAS NSC-810A:
Max Cooler Height: The U-NAS NSC-810A supports a CPU cooler height of up to 60mm.
Cooler Recommendation: Noctua NH-L9i with Noctua NF-A9 fan. This combination fits well within the height restriction and provides excellent cooling performance.
Power Supply
Current Power Supply: 350W from Seasonic.
Recommended Power Supply: While 350W might suffice for a low-power setup, a 500W 1U Flex power supply from a reputable brand like SilverStone (model: FX500) is recommended to ensure ample power headroom for future upgrades.
Memory
RAM: 2 x 16GB ECC RAM should be sufficient for your current needs and provides room for growth.
Additional Notes:
HBA Card: If you consider motherboards with fewer SATA ports, an HBA (Host Bus Adapter) can provide the additional ports needed. Ensure proper airflow and spacing if using an HBA in the compact U-NAS case.
Reply


Messages In This Thread
RE: Small 8-Bay NAS with ECC and Transcoding - by ed - 07-23-2024, 02:09 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)