NAS case recommendation

[Enquiries]

I currently have a Silverstone CS382 case for my NAS, however my 8 (10 TB) SAS drive temperatures are sitting at too hot. The Temps are sometimes in the high 50's c and as high as low 60's c. So I am looking for a case with better cooling. I need room for 8 SAS drives, mATX motherboard, and 2 expansion slots (10gb NIC and LSI HBA). So far I am seeing the NSC810 from uNAS, KCMconmey 8+1, and Jonsbo N5 as options. Which would be the best to get? Are there other options you can recommend?

[ed]

It seems you're dealing with higher-than-ideal drive temperatures, which can affect the longevity of your drives. For better cooling and ventilation, any of the options you're considering could be suitable, but I’ll highlight a few considerations:

uNAS NSC810: Known for excellent airflow and solid build quality, this case supports 8 drives with good cooling capabilities. It's well-regarded in the NAS community for its balance between cooling and expandability.
KCMconmey 8+1: This is another strong option, especially if you want a case with robust cooling. However, make sure to check if it has sufficient room for your HBA and NIC, as some budget options can be a bit tight with expansion slots.
Jonsbo N5: It offers a sleek design, but while it’s solid in terms of build quality, you might need to ensure there is enough airflow, as its cooling system isn’t always as aggressive as the other two.
In addition to those, you might also want to consider Fractal Design's Define series for high-quality, noise-reducing, and cooling-efficient cases, or even Supermicro’s 846 chassis, though it might stretch the budget a little. These provide robust cooling and good expandability.

Make sure to confirm the exact size and layout of the case before purchasing, especially with respect to how the cooling fans are positioned to ensure optimal airflow across your drives.