Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Qnap HS-264

#1
Looking at buying the QNAP HS-264.  I want to place it in an area where hardwiring will not be possible. Is it very complicated to add wifi to it?  If not, would you recommend a direct wifi dongle or a mini wifi router with ethernet out?   I understand the wifi will impact it's speed but for it's application, this won't be an issue.
Reply
#2
For extending your network to the QNAP HS-264 when direct wiring isn’t feasible, Powerline adapters and Coax adapters are great alternatives. Here’s a breakdown of each:

1. Powerline Adapters:
How They Work:

Powerline adapters use your existing electrical wiring to transmit network signals. You plug one adapter into a power outlet near your router and connect it to the router via Ethernet. Then, plug another adapter into a power outlet near your NAS and connect it via Ethernet.
Advantages:

Ease of Use: Simple setup with no need to run new cables.
Stability: Generally offers a more stable connection compared to Wi-Fi dongles, especially in situations where Wi-Fi may be unreliable.
Speed: Provides faster and more consistent speeds compared to Wi-Fi, depending on the quality of your electrical wiring.
Recommendations:

TP-Link TL-PA9020P: A high-speed Powerline adapter with passthrough power sockets and Gigabit Ethernet ports.
Netgear PLP2000: Another reliable option with fast speeds and good performance.
2. Coaxial (MoCA) Adapters:
How They Work:

MoCA (Multimedia over Coax Alliance) adapters use your existing coaxial cable wiring (typically used for cable TV) to transmit network signals. Connect one adapter to your router and coaxial outlet, and the other to your NAS and coaxial outlet.
Advantages:

Performance: Can deliver very high speeds and stable connections, often better than Wi-Fi.
Interference: Less prone to interference compared to Wi-Fi.
Recommendations:

Actiontec MOCA 2.1 Adapter: Known for reliable performance and high speeds.
Motorola MM1000: Another good MoCA 2.0 adapter that offers solid performance.
Summary:
Powerline Adapters are typically easier to set up and might be more suited if you already have accessible power outlets near your NAS.
Coaxial Adapters (MoCA) are excellent if you have existing coaxial cable infrastructure and are looking for potentially higher speeds and better stability.
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)