Switch & UPS choices

[Enquiries]

Switch Choice?: Net Gear G110EMX or MS510TXM or recommended
UPS: APC Smart-UPS SRT 2200VA 120V Online Double-Conversion or Eaton 9SX 2000VA 1800W 120V Online Double-Conversion UPS or recommended

Load needed: 1800w (1769w)
Printer: HP Office Jet Pro 7740 is 37w
Monitor: 300w
Switch: 30w
NAS:52-17w
Sound system: Logitech bZS906 5.1 500W
CAD Computer System :850w
RJ45 Network card 1x Intel 2.5G, 1 x 10Gb Marvell AQtion
Intel i9 14900k 24c /32t(8p/16e cores)Boost up to 6.0ghz
MB: Asus ProArt z790-Creator Wifi ATX DDR5
RAM: 96 GB 5600mhz (2x48) max 192GB
PS: 1200 w Gold Fully Modular (Asus/Seasonic) tested at full load of 800w

Let me know what you think would be the best choice for a switch and UPS (Synology has not tested these choices to work with DS1522+ possible compatibility issue)

[ed]

For your switch choice, considering your setup and potential future expansion, the Netgear MS510TXM could be a solid option. It offers a good balance of performance and affordability, with features like 10G connectivity that align well with your NAS and CAD system requirements.

As for the UPS, both the APC Smart-UPS SRT 2200VA and the Eaton 9SX 2000VA are excellent choices, providing reliable power protection for your critical equipment. Since your load requirement is around 1769W, either UPS should be able to handle it comfortably. However, given the slight difference in capacity, the Eaton 9SX 2000VA might offer a bit more headroom for future expansions or additional devices.