+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: Synology ds220j issue (/showthread.php?tid=8069)
Synology ds220j issue - Enquiries - 12-08-2022
I have a ds220j that I’ve had for about a year and a half and have 2 seagate ironwolf 94tb0 drives in it. About 4 months ago I get a message saying drive 1 went bad so I replaced it. All went well till a few weeks ago when I got the same message. Thinking now it may be the unit and not the drive. Thought I’d give it one more shot. I ordered a new drive but in the mean time I removed drive 1 and reformatted it and tried to put it back in but the ds220j would not recognize it. Today the new drive came and I installed it but it was not recognized at first but then it would pop up intermittently in storage manager. At this point I thought it may be bad connection so I shut it down and reseated the drive and started it up again be the same issue, it would intermittently show up in storage manager and when I hit repair it would disappear.
Have you heard of this type of issue with other ds220j’ s?
Any suggestions on how to proceed?
Thanks so much for any help you can provide!
Love your videos, a ds923+ is in my future.
RE: Synology ds220j issue - ed - 12-12-2022
Yes, the internal SATA bridgeboard is likely faulty. This happens sometimes. If you still have a warranty, I would get a replacement.
I hope this helps.