ASK NC
DS920+ RAM upgrade not recognized in VMM (but elsewhere it is!)? - Printable Version

+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Existing NAS users (https://ask.nascompares.com/forumdisplay.php?fid=5)
+---- Forum: NAS upgrades (https://ask.nascompares.com/forumdisplay.php?fid=11)
+---- Thread: DS920+ RAM upgrade not recognized in VMM (but elsewhere it is!)? (/showthread.php?tid=2884)



DS920+ RAM upgrade not recognized in VMM (but elsewhere it is!)? - markus - 01-19-2021

I've added a 16 GB module to my Synology DS920+.


It all seems to work very well, but the Virtual Machine Manager still says I have only 4 GB available on my host. See attached image. Any advice on why this is happening? The main reason for upgrading, was to allocate more RAM to VM, so it is quite a bummer.


I'm using Kingston DDR4 - 16 GB - SO DIMM 260-pin. Part number KCP426SD8/16.


(Thank you very much for your advice on the unofficial RAM upgrade option! And all your advice on Nascompares in general!)


DS920+ RAM upgrade not recognized in VMM (but elsewhere it is!)? - markus - 01-24-2021

For others having the same problem: I had to uninstall VMM. This does not remove the VMs, so I did not lose any data. (And my continuously failing attempt to get the VMM export feature working was not needed.) When I re-installed, I had to add the store volume back, which was quite easy. Also some network setup adjustments. VMM then recognized all my 20 GB of RAM.Possibly a bug in DSM 6.2.3-25426 Update 3, or in Virtual Machine Manager. Or something else.