+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Existing NAS users (https://ask.nascompares.com/forumdisplay.php?fid=5)
+---- Forum: NAS upgrades (https://ask.nascompares.com/forumdisplay.php?fid=11)
+---- Thread: Qnap Red Light Flashing - continued topic? (/showthread.php?tid=2384)
Qnap Red Light Flashing - continued topic? - muniek12 - 11-16-2020
Dear Experts,
Some time ago there was a post on Q&A Forum about status LED flashing
https://nascompares.com/answer/qnap-red-light-flashing-solution/
In the article there was statement "If it doesn’t boot, you will need to come back to me.".....sooo I come back.
I have QNAP 453B, after firmware update the NAS is "dead".
Status LED if flashing (color red, period 2sec).
The HDD drive's are plugged out.
There is no beep signal.
Fan is not rotate (I disconnected the fun plug and connect the fan to external power supply - fun is working).
If needed I can replace the FAN to new one. But before firmware update he works fine (software update damaged him? I don't think so.)
What do you think? Is there any option to bring the NAS alive?