+- ASK NC (https://ask.nascompares.com)
+-- Forum: Q&A (https://ask.nascompares.com/forumdisplay.php?fid=1)
+--- Forum: Before you buy Q&A (https://ask.nascompares.com/forumdisplay.php?fid=2)
+--- Thread: Drive tray stuck (/showthread.php?tid=10314)
Drive tray stuck - Enquiries - 01-10-2024
I have just purchased a new DS1522+ and prior to permanently setting it up was running through various tutorials. I removed a drive tray and drive to simulate a drive failure intending to check the process through. This is when things went wrong.
Having removed the drive from the tray I pushed the tray back in but had not refitted the drive securing strips, the drive tray went too far in and it now firmly stuck. I can now see drive securing strips hit a couple of raised lugs in the back of the DS to stop this happening.
Has anyone else been this daft and sorted it out. I guess I can probably cut through the tray and release it but that is far from my plan.
Any good ideas welcomed, I don't need beating up about this, I have already beat myself up enough.
Thanks
Steve
RE: Drive tray stuck - richtheace - 01-10-2024
If you switch the NAS off and remove the other drives, can you not get access to the end of the tray and remove it that way ?